How to solve the problem of children's inflatable amusement equipment?
Published:
2023-01-17 15:54
Source:
1. Paste requirements
Apply glue evenly on the place where the toy is to be pasted and the cloth, and then let it dry for half a minute. Paste the cloth sample to the place where the toy is to be pasted, flatten it without warping the edge, and then paste it
2. The toy is cut
(1) Cut less than 5cm and paste directly
(2) If the cut is longer than 5cm, it should be sewn with needle and thread, and then pasted with cloth strip or cloth sample
3. Joint opening
First, use needle and thread to sew the opening flat (or remove it from the bottom of the air cushion to enter and sew it). The opening can be treated firmly by pasting. At the same time, consider the beauty, and do not affect the subsequent use.
4. Abnormal bulge of air cushion
Generally, the pull towel is torn from the air cushion. The bottom of the air cushion can be removed along the seam, and the tie bar can be connected with the air cushion with a needle and thread, and then pasted with a cloth strip to protect the seam.
5. Large air leakage
After the toy has been used for a long time, due to the large needle hole and seam in some parts, the amount of air leakage increases greatly. It can be considered to paste cloth strips at the seam to reduce the amount of air leakage. If the toy is too old, it should be considered to scrap it to prevent problems in operation.
6. Degumming
Some easily worn parts are easy to be unglued after a long time of use. The cloth can be cut into different shapes and pasted at the unglued part.
7. Beautify the warped edge
Use a small brush to apply a proper amount of glue on the warped edge, stop for a while, press it flat and tight, and stick it firmly.
[Common sense of maintenance]
(1) Before deflating the toy, clean the surface of the toy with a semi-dry towel, deflate it after drying, and fold it in a cool and clean place for storage;
(2) . If the toy is not properly kept, if it cannot be drained, put it in a dry and ventilated place and blow it until the water is evaporated. Do not store it with water;
(3) The blower shall be stored in a dry and ventilated place to prevent moisture;
(4) Toys should be regularly checked for moisture when stored for a long time. They should be blown up in a ventilated place and wiped clean.
Amusement,Ocean ball
Related News
Add Wechat
Add WhatsApp
Wenzhou Haoyun Amusement Equipment Co., Ltd
Tel: 86-18368737213
Address:No. 111 Jiangbin Road, Meiao Industrial Zone, Qiaoxia Town, Yongjia County, Wenzhou City, Zhejiang Province
Zhejiang Tongbeiwu Amusement Equipment Co. , Ltd.
Tel: 86-18368737213
Add：Qiaotou Town, Yongjia County, Wenzhou City
Wenzhou Haoyun Amusement Equipment Co., Ltd Powered by 300.cn SEO
Zhejiang Tongbeiwu Amusement Equipment Co. , Ltd.